3/5/2023 0 Comments Make a rope belt![]() Neaten the base of the sleeves, fold and press up a 2.5cm hem, stitch hem tape inside, then machine-stitch in place. Overlock the seam allowance and pull out the gathering stitches. Adjust the gathers to fit the armhole, then pin and sew in place. Match the side and underarm seams of the sleeves, then pair the centre notch of the sleeve to the end of the shoulder seam. Pull the gathering threads up and place the sleeves into the armhole. Match, pin and stitch the underarm sleeves, right sides facing, then turn right sides out. Complete a row of gathering stitches around the head of the sleeves, starting from the front notch and finishing at the back ones. Match, pin and stitch the side seams of the back and front pieces, right sides facing, then press the seams open. Pin and edgestitch in place from the right side of the neckline, sandwiching the raw edge inside. ![]() Fold the neckband onto the wrong side of the neckline and position the remaining neat edge over the stitching line. Match, pin and sew the remaining shoulder, continuing the stitching into the neckband. Trim any excess binding at the edges of the shoulders. Stretch the band slightly, then pin and stitch in place with a 1cm seam allowance. Neaten one long edge of the neckband and position it around the neckline from one side of the open shoulder to the other. Match the shoulder seams on the front and back, then pin and sew one shoulder, right sides facing, and press the seam open. Neaten the shoulder and side seam edges on the back and front pieces. Download and print the template, then follow the cutting guide.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |